hva ser du etter?

Populære søk

Basalt Fiber Composites in Motorcycle Helmets: Performance, Safety & Cost Analysis

Hjem / Motorsykkel hjelm /

May 28, 2026

Motorcycle helmet manufacturers are constantly seeking materials that balance impact protection, weight, thermal comfort, and cost. While fiberglass, carbon fiber, and Kevlar have dominated the market, basalt fiber has emerged as a high-performance alternative — offering mechanical properties comparable to fiberglass and S-glass at a significantly lower cost than carbon fiber.

This article presents a data-driven comparison of basalt fiber composites against traditional helmet shell materials, referencing ASTM, EN, and ISO standards.

Property	Basalt Fiber	E-Glass Fiber	Carbon Fiber (Standard)	Aramid (Kevlar 49)
Tensile Strength (MPa)	3,000 – 4,840	2,400 – 3,450	3,500 – 5,000	3,000 – 3,600
Young's Modulus (GPa)	79 – 93	69 – 72	230 – 240	70 – 112
Elongation at Break (%)	3.1 – 3.2	4.5 – 4.8	1.5 – 2.0	2.8 – 3.6
Density (g/cm³)	2.65 – 2.80	2.50 – 2.60	1.75 – 1.80	1.44 – 1.47

Key insight: Basalt fiber bridges the gap between E-glass and carbon fiber. It offers ~30% higher tensile strength than E-glass with a substantially higher modulus, meaning stiffer, more impact-resistant helmet shells without the high cost of carbon fiber.

Property	Basalt Fiber	E-Glass Fiber	Carbon Fiber (Standard)	Aramid (Kevlar 49)
Tensile Strength (MPa)	3,000 – 4,840	2,400 – 3,450	3,500 – 5,000	3,000 – 3,600
Young's Modulus (GPa)	79 – 93	69 – 72	230 – 240	70 – 112
Elongation at Break (%)	3.1 – 3.2	4.5 – 4.8	1.5 – 2.0	2.8 – 3.6
Density (g/cm³)	2.65 – 2.80	2.50 – 2.60	1.75 – 1.80	1.44 – 1.47

Test Parameter	Basalt Composite	Fiberglass	Carbon Fiber	Hybrid Basalt-Carbon
Peak acceleration (G)	198 ± 15	215 ± 18	175 ± 12	185 ± 14
HIC (Head Injury Criterion)	1,320	1,480	1,150	1,240
Shell penetration resistance	Pass (2.3 kN)	Pass (2.0 kN)	Pass (2.5 kN)	Pass (2.4 kN)

Basalt composites consistently pass ECE R22-06 impact tests with a peak acceleration well under the 275 G limit. The slightly higher HIC than carbon fiber is offset by a 40–60% material cost reduction.

Property Basalt Fiberglass Carbon Fiber

Thermal conductivity (W/m·K) 0.035 – 0.045 0.040 – 0.050 1.0 – 2.0

Max service temperature (°C) 650 – 750 450 – 550 300 – 500

Coefficient of thermal expansion (×10⁻⁶/K) 6.5 – 8.0 5.0 – 6.0 -0.6 – 1.0

Basalt fiber's low thermal conductivity (an order of magnitude lower than carbon fiber) means less heat transfer from the outer shell to the EPS liner during hot weather — offering a tangible comfort advantage for riders.

Property	Basalt	Fiberglass	Carbon Fiber
Thermal conductivity (W/m·K)	0.035 – 0.045	0.040 – 0.050	1.0 – 2.0
Max service temperature (°C)	650 – 750	450 – 550	300 – 500
Coefficient of thermal expansion (×10⁻⁶/K)	6.5 – 8.0	5.0 – 6.0	-0.6 – 1.0

Factor	Basalt	E-Glass	Carbon Fiber
Raw material cost (USD/kg)	$3 – 6	$2 – 4	$20 – 60
Mold cycle time (prepreg, min)	20 – 30	20 – 30	30 – 45
Surface finishing	Good (painting-ready)	Good	Excellent (visible weave)
OEM adoption level	Emerging	Mature	Mature (premium)

Factor	Basalt	E-Glass	Carbon Fiber
Raw material cost (USD/kg)	$3 – 6	$2 – 4	$20 – 60
Mold cycle time (prepreg, min)	20 – 30	20 – 30	30 – 45
Surface finishing	Good (painting-ready)	Good	Excellent (visible weave)
OEM adoption level	Emerging	Mature	Mature (premium)

Basalt fiber is produced from volcanic rock through a melt-extrusion process requiring no chemical additives. The energy intensity (kWh/kg) is approximately:

Material	Embodied Energy (MJ/kg)	CO₂ Footprint (kg CO₂/kg)	Recyclability
Basalt fiber	35 – 50	2.3 – 3.0	Fully recyclable
E-glass	45 – 60	3.0 – 4.0	Limited
Carbon fiber	200 – 400	15 – 30	Difficult / costly

Basalt fiber's 70–85% lower carbon footprint compared to carbon fiber makes it an attractive option for helmet brands targeting sustainability without compromising on safety.

Basalt fiber composites offer a compelling proposition for motorcycle helmet manufacturers:

Mechanical performance comparable to or exceeding fiberglass with higher stiffness and impact resistance

Thermal comfort superior to carbon fiber helmets due to low thermal conductivity

Cost structure approximately 80–90% cheaper than carbon fiber, enabling premium-level performance at mid-market price points

Sustainability aligned with circular economy goals

As ECE 22.06 and FIM FRHPhe standards push for higher impact thresholds, basalt fiber composites are well-positioned to become the new standard for mid-to-premium motorcycle helmet shells.

TAGGER : Basaltfiber Motorcycle Helmet Composite Materials Helmet Safety Material Science

Kategorier

Bloggliste

TAGGER

Technical Comparison FRP Helmet Safety Material Science Safety Gear Cycling Safety Industry Protective Equipment

Fortell oss dine behov

For spørsmål om produkter og tjenester, vennligst legg igjen en melding umiddelbart, så kontakter vi deg innen 24 timer.

Navn*
E-post *
Telefon
Produkt Hvilket produkt ser du etter? (valgfri)
Hjelpe deg bedre
Attach Files

Tip:Supports jpg, jpeg, png, gif, pdf, doc, docx, xls, xlsx, txt, rar and zip. Keep files smaller than 5MB